1. A circuit is said to be linear when
the current – voltage relation-ship can be expressed by linear
(A) Algebraic equation
(B) Differential equations
(C) Integral equations
(D) Integro-differential equations
(E) All of the above
(F) None
Answer : [E] All of the above
2. Which of the following is not a
characteristic of an independent voltage source?
(A) Voltage independent on magnitude of
current drawn
(B) Voltage dependent on magnitude of
current drawn
(C) Independent of direction of current
flow
(D) Can supply (or) receive
uninterrupted energy at constant voltage
(E) Both (B) & (D)
(F) All of the above
Answer : [B] Voltage dependent on
magnitude of current drawn
3. In the mesh analysis technique, the
independent variables are
(A) Mesh currents
(B) Branch currents
(C) Mesh voltages
(D) Node voltages
(E) Both (A) & (C)
(F) none of the above
Answer : [A]
4. How is the response of a circuit
related to the time constant of a circuit?
(A) Smaller the time constant, slower
is the response
(B) Magnitude of the time constant has
no effect on response
(C) Smaller the time constant faster is
the response
(D) Larger the time constant, faster is
the response
(E) Both (A) & (D)
(F) None of the above
Answer : [C]
5. In an LC circuit, the damping ratio
(ζ) is equal to
(A) Unity
(B) Zero
(C) Infinite
(D) C/L
(D) L/C
(F) LC
Answer : [B]
6. What is (are) the condition(s) for
adding a two or more sinusoidal functions?
(A) The same angular velocity with a
different phase angle
(B) A different angular velocity with a
different phase angle
(C) The same angular velocity with
always same phase angle
(D) The different angular velocity with
a same phase angle
(E) All of the above
(F) None of the above
Answer : [A]
7. Which one of the following is not
true for power Q delivered to a pure capacitor C when it is connected
across a sinusoidal voltage source of V, frequency f Hz, and a
current I flowing through it?
(A) Q = VI
(C) Q = 2πfCV 2
(B)Q = −VI
(D)Q=I2/2πfC
Answer : [A]
8. A graph is made up of „n‟ nodes,
including the reference node. Which of the following will not meet
the condition to form a tree of the graph?
(A) Must connect all „n‟ nodes
(B) Must connect all „(n-1)‟ nodes
except the reference node
(C) Must be oriented
(D) Must not have a closed path
Answer : [B]
9. In an element to node incidence
matrix, which of the following represents that an element is oriented
towards the node?
(A) 0
(B) 1
(C) -1
(D) None of the above
Answer : [C]
10. How many branches can be connected
to a node?
(A) 1
(B) 2
(C) 3
(E) 5
(F) 6
Answer : [G]
No comments:
Post a Comment